Digitization and Preservation of Cultural Heritage

0
1924

Practically since its inception, photography has maintained a close relationship with science and cultural heritage. Its nature as an automatism endowed photography with a presumed objectivity and proposed it as a solution to the problem of the feared subjectivity introduced by the artist’s hand in their drawings and sketches. The catalog or inventory was early proposed as a fundamental axis of cultural heritage preservation tasks, and photography as an inseparable tool for such tasks.
The democratization of digital technology throughout the last decade of the 20th century, the development of the Internet and digital imaging, were seen as an ambitious solution to guarantee universal access to culture, and thus, at the beginning of the 21st century, the systematic digitization of cultural heritage began. Thus, the immateriality of the digital image not only allowed a quantitative solution to the problem of access to culture to be glimpsed, but also introduced new ways of producing art and culture in general, as well as new paradigms in the relationship and preservation of cultural heritage.
This research is situated at the juncture of the separation between image and matter, or dematerialization through transcoding (digitization) as a strategy for the preservation and prospecting of cultural heritage. Thus, the ability of the digital image to accurately and objectively record various qualities of a cultural asset proposes it as a tool for preserving the informational value related to the appearance of the cultural asset.
The quality of reliability in the image, as an unequivocal understanding of the represented information and the main attribute of quality, is only possible through appropriate calibration resulting from decisions made through the analysis of a system’s quality. Thus, the study and analysis of image quality and its peripheral implications in the context of digitizing cultural assets is the main objective of this research. This research establishes an ethical, deontological, and epistemological reflection on the act of digitization in the field of cultural heritage preservation, as well as on the concept of image quality as the purpose of system calibration. Image quality is described through attributes, whose evaluation provides evidence that should lead to appropriate decision-making.

Standardization is proposed as one of the pillars of device calibration, as it allows process repeatability and consequently its unequivocal understanding. Thus, throughout this research, the standards ISO-TR 19263-1 (2017) Photography – Archiving systems – Part 1, Best practices for digital image capture of cultural heritage material and ISO-TS 19264-1 (2017) Photography – Archiving systems – Image quality analysis – Part 1, reflective originals, as well as the corpus of standards related to these publications, are examined in order to identify the most significant attributes that define system quality, their metrics, and conformity thresholds.
From all this, as a result of this research, various methodological proposals based on image analysis are put forward to describe system quality and its reasoned calibration. The possibilities of the digital image for preserving the informational value of a cultural asset, the immaterial nature of the digital image, which, for perceptual reasons, must be re-materialized, imply new paradigms regarding its meaning and consequently the relationship of the individual or society with the digital representation of said cultural asset.
This work is a review of the research text carried out throughout the author’s doctoral thesis, presented in October 2023 at the Complutense University of Madrid under the title “Analysis of Quality in the Digitization of Cultural Heritage” Available at:
Amazon
Books of Demand (Publisher)
Casa del Libro

Index

  • Symbols and notation used
  • Preface
  • 1. Introduction
  • 1.1. Introduction
  • 1 2. Fundamentals
  • 2.1. Digitization and preservation of cultural heritage
  • 2.1.1. Of reality and photography
  • 2.1.2. Of photography and cultural heritage
  • 2.1.3. Of photography, the aesthetics of objectivity, and science
  • 2.1.4. Of digitization and preservation
  • 2.1.4.1 Digitization
  • 2.1.4.2 Preservation
  • 2.1.5. Of digital image and quality
  • 2.1.6. Of standardization and preservation
  • 2.1.7. Quality and decision
  • 2.2. Fundamentals of digital photography
  • 2.2.1. Introduction
  • 2.2.2. Fundamentals of digital image formation devices
  • 2.2.2.1 Image sensors
  • 2.2.2.2 Color formation
  • 2.2.2.3 Image formats and cameras
  • 2.2.2.4 “Mirrorless” cameras
  • 2.2.3. Scanners
  • 2.2.4. Image editing software
  • 2.3. Computational imaging
  • 2.3.1. Introduction
  • 2.3.2. Panoramas and gigapixels
  • 2.3.2.1 Quality control in stitching
  • 2.3.3. Image stacking
  • 2.3.4. Exposure fusion
  • 2.4. Three-dimensional representation
  • 2.4.1. Introduction
  • 2.4.2. Photogrammetry
  • 2.4.3. Structure from Motion
  • 2.4.3.1 Brief history of SfM software
  • 2.4.3.2 SfM derivatives
  • 2.4.4. Dissemination and preservation of three-dimensional documents
  • 2.5. Image formation in non-visible bands
  • 2.5.1. Introduction
  • 2.5.2. Energy behavior in bodies
  • 2.5.2.1 Reflectance
  • 2.5.2.2 Transmittance
  • 2.5.2.3 Absorbance
  • 2.5.2.4 Fluorescence
  • 2.5.3. Image in the infrared region
  • 2.5.4. Image in the ultraviolet region
  • 2.5.5. Multispectral image
  • 2.5.6. Image of fluorescence phenomena
  • 2.5.7. Image analysis
  • 2.5.7.1 Decorrelation
  • 2.5.7.2 Correlation
  • 2.5.8. Conclusions
  • 3. Quality analysis
  • 3.1. Standards, standardization, and quality attributes
  • 3.1.1. Introduction
  • 3.1.2. Notes on standardization
  • 3.1.2.1 The obsolescence of standards
  • 3.1.2.2 Convergence between standards and institutions
  • 3.1.2.3 Quality attributes and regulations
  • 3.1.2.4 Quality attributes and characterization
  • 3.1.2.5 Historical approach to the quality attribute
  • 3.1.3. Proposal for categorization of quality attributes
  • 3.2. Light and illumination 93 3.2.1. Introduction 93 3.2.2. Light and visual appearance
  • 3.2.2.1 Color
  • 3.2.2.2 Brightness
  • 3.2.2.3 Texture
  • 3.2.2.4 Transparency
  • 3.2.2.5 Fundamentals of photometry
  • 3.2.2.6 Luminosity (brightness)
  • 3.2.2.7 Lightness
  • 3.2.2.8 Gamma factor
  • 3.2.3. Quality attributes in light sources
  • 3.2.3.1 Spectrum
  • 3.2.3.2 Color temperature
  • 3.2.3.3 Color Rendering Indices
  • 3.2.3.4 Metamerism Indices
  • 3.2.3.5 Ultraviolet component
  • 3.2.3.6 Polarization
  • 3.3. Photographic exposure
  • 3.3.1. Introduction
  • 3.3.2. Aperture
  • 3.3.3. Shutter
  • 3.3.4. Exposure values
  • 3.3.5. Brief historical review on sensitivity
  • 3.3.6. Digital Exposure Index
  • 3.3.7. New metrics
  • 3.3.7.1 Standard Output Sensitivity (SOS)
  • 3.3.7.2 Recommended Exposure Index (REI)
  • 3.3.8. Exposure meter calibration
  • 3.3.8.1 Reflected light
  • 3.3.8.2 Incident light
  • 3.3.8.3 Relationship between incident and reflected measurements
  • 3.3.9. Exposure measurement with non-continuous light
  • 3.3.10. Practical application of Exposure Index calculation
  • 3.4. Tone transfer
  • 3.4.1. Introduction
  • 3.4.2. Characteristic curve vs OECF
  • 3.4.3. Calculation and representation of the OECF
  • 3.4.4. OECF, tonal reproduction and quality
  • 3.4.5. Charts for the evaluation of the OECF
  • 3.4.6. Relationship between scales
  • 3.5. Gain modulation
  • 3.5.1. Introduction
  • 3.5.2. Determination of gain
  • 3.5.3. Gain conformity thresholds
  • 3.5.4. Film Vs Digital
  • 3.6. White balance
  • 3.6.1. Introduction
  • 3.6.2. Analysis of white balance adjustment
  • 3.6.3. Observations on ISO 19264-1
  • 3.7. Uniformity
  • 3.7.1. Introduction
  • 3.7.2. Vignetting
  • 3.7.3. Lack of uniformity in the sensor
  • 3.7.4. Spatial crosstalk in large areas
  • 3.7.5. Flare
  • 3.7.6. Light falloff due to illumination
  • 3.7.7. Evaluation of lack of uniformity according to ISO 17957:2015
  • 3.7.8. Control of lack of uniformity
  • 3.7.9. Conformity thresholds of ISO 19264-1:2021
  • 3.8. Noise
  • 3.8.1. Introduction
  • 3.8.2. Noise analysis in the spatial domain
  • 3.8.2.1 Fundamentals
  • 3.8.2.2 Brief historical review of ISO 15739
  • 3.8.2.3 Chrominance noise
  • 3.8.2.4 Total signal-to-noise ratio
  • 3.8.3. Noise analysis in the frequency domain
  • 3.8.3.1 Fundamentals
  • 3.8.3.2 Visual noise
  • 3.8.3.3 Noise power spectrum
  • 3.8.4. Dynamic range
  • 3.8.5. Dynamic range and ISO standards
  • 3.8.6. Observations on noise treatment in ISO 19264-1
  • 3.9. Resolution
  • 3.9.1. Introduction
  • 3.9.2. Units used
  • 3.9.3. Subjective evaluation of detail
  • 3.9.3.1 Introduction
  • 3.9.3.2 USAF chart
  • 3.9.3.3 Hyperbola wedges
  • 3.9.3.4 Stars
  • 3.9.4. Objective evaluation of detail
  • 3.9.4.1 Introduction
  • 3.9.4.2 Diffraction
  • 3.9.4.3 Influence of noise on the MTF
  • 3.9.4.4 Crosstalk
  • 3.9.4.5 Aliasing
  • 3.9.4.6 Calculation of the SFR
  • 3.9.4.7 Relationship between spatial resolution FOV, AOV, and magnification
  • 3.9.4.8 Interpretation of the SFR
  • 3.9.4.9 Acutance
  • 3.9.4.10 Texture analysis
  • 3.9.4.11 Objectives of ISO 19264-1:2021
  • 3.9.4.12 Depth of field, focus, and hyperfocal
  • 3.9.5. Notes on algorithm implementation