Identificación no destructiva de barnices mediante espectroscopía de fluorescencia ultravioleta

0
325

The article “Non-destructive varnish identification by UV fluorescence spectroscopy” written by Thoury, Mathieu; Elias, Mady; Frigerio, Jean-Marc, and Barthou, Carlos in 2005 explores an innovative technique for the identification of varnishes in artworks through the use of ultraviolet (UV) fluorescence spectroscopy. Determining the chemical nature of the varnish is crucial for art restorers, as it allows them to select the appropriate solvent for its removal. Until the publication of this study, such identification was carried out through destructive chemical analysis methods. The proposed technique is non-invasive, can be implemented in situ, and produces real-time results by comparing the emission spectrum of the unknown varnish with reference spectra of resins and varnishes, both fresh and artificially aged, as well as old varnishes.

The method is based on the collection and numerical comparison of emission fluorescence spectra of varnishes and reference resins. For this purpose, reference samples were prepared with natural resins such as damar, mastic, and sandarac, dissolved in linseed oil and turpentine, and subjected to different thermal aging times to study their spectral properties. The results indicate notable variations in the UV fluorescence of these resins according to their aging state. The experimental equipment includes a spectrofluorimeter capable of exciting the samples with wavelengths between 240 and 850 nm and recording the fluorescence emitted in the visible range.

Identification is carried out by comparing the spectrum of an unknown varnish with a database of reference spectra. The position of the emission maximum of the spectrum is a key parameter in this identification. The software developed for this purpose calculates the minimum squared distance between the unknown spectrum and the reference spectra, prioritizing the match in the position of the intensity maximum. Additionally, the full width at half maximum of the spectrum and other secondary parameters are considered to refine the identification.

The study also presents practical cases, demonstrating the effective identification of varnishes in several real artworks. This success is further validated through chemical analysis techniques such as gas chromatography coupled with mass spectrometry (GC-MS). Although the technique is not completely infallible and may be limited by the presence of fluorescent impurities or the lack of certain aging states in the database, it offers a powerful tool for art conservation and restoration. In the future, the development of a portable device combining this technique with pigment and dye identification is anticipated, thereby enhancing the capacity for analysis directly in front of artworks.

In summary, this article presents a non-destructive, rapid, and effective method for varnish identification through UV fluorescence spectroscopy, with direct applications in the restoration and study of artworks, and potential for significant improvements in the technology and databases used.

Check on the publisher’s website