Fluorescent Whitening Agents in Color Reproduction.

0
754

Perhaps no reader finds it strange to see how certain materials, such as papers or fabrics, exhibit characteristic fluorescence when observed under the well-known “black light” or Ultraviolet lamps.

However, this very common and entertaining phenomenon holds some significance in digitization tasks, reading with spectrophotometers, and even the musealization of certain materials.

Fluorescent whitening agents, commonly known as Fluorescent Whitening Agent (FWA), also known as Optical Brightening Agents (OBAs), are chemical substances used as additives mainly in fabrics and papers as low-cost whitening agents. And although these agents are present in nature, they are not naturally present in cellulose- or cotton-based compounds.

uvFWAs react to ultraviolet light in the visible spectrum, emitting a bluish fluorescence, technically known as “bluing,” which compensates for yellowing, offering a sensation of whiteness. From a more technical point of view, FWAs produce an increase in energy in the visible spectrum in the region of 450-480nm (specifically 457nm), provided there is an ultraviolet component in the illuminant.

This situation leads us to a problem of some magnitude, from the perspective that some spectrophotometers on the market are filtered for UV, so they cannot register this fluorescence. This implies that while a human perceives a region as white, due to the neutralization of yellow by the bluish effect of the FWA, a spectrophotometer perceives it as yellow. Similarly, photographic equipment, which may include more or less severe UV filters, can experience a similar phenomenon.

Another problem arising from the use of FWAs, related to the musealization tasks of certain works on paper of not very good quality, is the use of UV-filtered protective glass, which, after placing the work behind one of these glasses or subjecting it to UV-filtered illumination, causes the papers to appear much more yellow even when using white light.

High-quality color charts are mounted on supports that do not contain FWAs in their composition; conversely, other more homemade printing charts on low-quality papers are rich in FWAs, so they may present certain deviations in their spectrophotometric readings or digitization processes.

A good way to evaluate the quality of a paper, in terms of its whiteness and therefore its stability, is to visualize it under a small UV or “black light” lamp. FWAs are not especially stable, so when certain low-quality papers or fabrics yellow, it is not primarily due to the yellowing of the fibers but rather the degradation of the FWAs.

The problem of FWAs takes on some magnitude when we create Output-type color profiles to characterize printers, since our measuring instruments will “see” the test colors as more yellow than they actually are, so the resulting profile will introduce, under our vision, a bluish cast.

Tools such as ArgyllCMS allow characterization of FWAs, but we need a spectrophotometer that is not filtered. Similarly, the new i1 Pro 2 from X-Rite has the capability to work with or without a UV filter.

Along the same lines, many luminaires and standardized light booths do not include UV radiation, so the observation of certain documents is conditioned.